H3C GB0-372-ENU

Today, H3C GB0-372-ENU certification exam enjoyed by many people and it can measure your ability. With the certificate of H3C certified engineers, you will have a better job and a better future.

Passing the H3C GB0-372-ENU exam has never been faster or easier, now with DumpCollection GB0-372-ENU questions and answers, you absolutely can pass your exam on the first try.

DumpCollection is a good website that provides you with high quality and great value IT certification exam materials. Our exam dumps are written by IT experts who devoting themselves to providing candidates with the best and latest questions and answers on the basis for the real exam. 99.9% of hit rate absolutely can help you pass GB0-372-ENU exam.

If you don't know how to start preparing for H3C GB0-372-ENU exam, DumpCollection will be your study guide. The excellent PDF version & Software version exam materials cover all the key points required in the exam. You just take 20-30 hours to learn it.

DumpCollection will provide our customers with one year free update. Once the exam materials updated, we will prompt update these exam questions and answers and automatically send the latest version to your mailbox. If you fail in the exam, you just need to send the scanning copy of your examination report card to us and we will give you FULL REFUND.

Before you choose DumpCollection, you can download our free demo which includes a part of questions and answers about H3C GB0-372-ENU exam. With the help of our H3C GB0-372-ENU exam dumps, you will pass your exam with ease. DumpCollection will be your best choice.

Simple operation: just two steps to complete your order. After you make your payment, we will immediately send the product to your mailbox. Download the attachment and you will get your product.

Online GB0-372-ENU Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.

H3C GB0-372-ENU Exam Syllabus Topics:

H3CSE-RS-SW Sample Questions:

1. Two routers are connected together through a LAN to form a VRRP backup group. If router RTA receives a VRRP protocol message sent by router RTB, and the value of the Auth Type field in the message Priority field is 2, then which of the following is correct?

A) Router RTB enables VRRPV3 protocol
B) Router RTB enables VRRPV2 protocol
C) VRRP simple character authentication is enabled on router RTB
D) Router RTB is the owner of the VRRP IP address

2. In NTP client/server mode, which of the following statements about configuration verification are correct? (Multiple choice)

A) The client should associate the key with the server to successfully complete the verification.
B) When enabling authentication, you must configure both the authentication key and the trusted key.
Otherwise, authentication cannot be started normally.
C) If the client does not enable authentication and the server enables authentication, the client's clock can also be synchronized
D) The authentication of the client and server must be consistent, otherwise the clock synchronization will fail.

3. Two routers RTA and RTB are connected together through a LAN to form a VRRP backup group.
The IP address of the host HostA in the LAN is 192.168.0.1, and the gateway MAC address learned by HostA is 0000-5e00-0105. What can we learn from the above information? (Multiple choice)

A) Backup group uses virtual MAC mode
B) The backup group vrid is 5
C) The backup group vrid is 4
D) The backup group uses real MAC mode

4. In the switching network shown in the figure, VLAN10 is set as Private VLAN on switch SWA, VLAN2 and VLAN3 are Secondary VLAN of VLAN10, VLAN2-VLAN20 is set on switch SWB, and VLAN20 is set as Private VLAN, and VLAN4 is Secondary VLAN of VLAN20. After setting the IP addresses of each device as shown in the figure, which of the following is correct for the communication between PCA and PCB?

A) The local proxy ARP function needs to be enabled in the VLAN10 virtual interface view of SWA so that PCA can communicate with PCB.
E You need to enable the local proxy ARP function in the VIAN20 virtual interface view of SWB so that PCA can communicate with PCB.
B) You need to enable the local proxy ARP function in the VLAN10 view of SWA so that PCA can communicate with PCB.
C) The local proxy ARP function needs to be enabled in the VLAN20 view of SWB so that PCA can communicate with PCB.
D) PCA can communicate directly with PCB without additional configuration

5. The IP address of host PCA is 40.1.1.1, and the MAC address is 0011.1111.11. It is connected to the GigabitEthernet1/0/1 port of the switch. The following commands are configured on the switch:
[H3C] vlan 10 [H3C-vlan10] quit
[H3C] vlan 20
[H3C-vlan20] protocol-vlan ipv4
[H3C-vlan20] quit
[H3C] vlan 30 [H3C-vlan30] quit
[H3C] mac-vlan mac-address 0022-2222-2222 vlan 30
[H3C] vlan 40
[H3C-vlan40] ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[H3C-vlan40] quit
[H3C] interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1] port link-type hybrid
[H3C-GigabitEthernet1/0/1] port hybrid pvid vlan 10
[H3C-GigabitEthernet1/0/1] port hybrid vlan 10 20 30 40 untagged
[H3C-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 20 0
[H3C-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 40
[H3C-GigabitEthernet1/0/1] mac-vlan enable
After the configuration is complete, which of the following can be determined that PCA will join?

A) VLAN 20
B) VLAN 10
C) VLAN 30
D) VLAN 40

Solutions: