IBM C2180-274

Today, IBM C2180-274 certification exam enjoyed by many people and it can measure your ability. With the certificate of IBM certified engineers, you will have a better job and a better future.

Passing the IBM C2180-274 exam has never been faster or easier, now with DumpCollection C2180-274 questions and answers, you absolutely can pass your exam on the first try.

DumpCollection is a good website that provides you with high quality and great value IT certification exam materials. Our exam dumps are written by IT experts who devoting themselves to providing candidates with the best and latest questions and answers on the basis for the real exam. 99.9% of hit rate absolutely can help you pass C2180-274 exam.

If you don't know how to start preparing for IBM C2180-274 exam, DumpCollection will be your study guide. The excellent PDF version & Software version exam materials cover all the key points required in the exam. You just take 20-30 hours to learn it.

DumpCollection will provide our customers with one year free update. Once the exam materials updated, we will prompt update these exam questions and answers and automatically send the latest version to your mailbox. If you fail in the exam, you just need to send the scanning copy of your examination report card to us and we will give you FULL REFUND.

Before you choose DumpCollection, you can download our free demo which includes a part of questions and answers about IBM C2180-274 exam. With the help of our IBM C2180-274 exam dumps, you will pass your exam with ease. DumpCollection will be your best choice.

Simple operation: just two steps to complete your order. After you make your payment, we will immediately send the product to your mailbox. Download the attachment and you will get your product.

Online C2180-274 Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.

IBM C2180-274 Exam Syllabus Topics:

IBM WebSphere DataPower SOA Appliances Firmware V5.0 Solution Implementation Sample Questions:

1. A solution implementer is considering the following active-standby configuration between two DataPower appliances:

In a simulated power failure of Appliance 1 using this active-standby configuration in a sandbox environment, Appliance 2 did not take over the active interface. What could be causing this behavior?

A) There might be a firewall between the two appliances which has not been configured to allow broadcast traffic in an active-standby configuration.
B) Appliances in the active-standby configuration must be in the same network subnet and broadcast domain.
C) It can take several minutes for the standby interfaces to be active in an active-standby configuration.
D) In an active-standby configuration, thepriority of Appliance 2 must be changed to 99 for the failure takeover to work.

2. A solution implementer has configured a processing policy that executes a stylesheet with the following code snippet:

Which MQ front side handler properties should the solution implementer configure to allow this code snippet to access the message property named "myprop"?

A) Enable Parse Properties
B) Select the Exclude Message Header property "Rules and Formatting Header (MQRFH2)"
C) Select the Exclude Message Header property "Rules and Formatting Header (MQRFH)"
D) Select the Exclude Message Header property "Message Properties (MQMP)"

3. In the Configured Rules section of the Policy Editor, two request rules are listed, Rule_One, followed by Rule_Two, and both use the same matching rule.

What occurs when a message that satisfies the matching rule is received?

A) Rule_One will be executed, followed by Rule_Two, since all rules that satisfy the match are executed.
B) Only Rule_One will beexecuted since it is the first rule that matches the request.
C) The policy will not be applied, since the Policy Editor will not allow a configuration of rules that have the same match.
D) This policy will fail during execution, since it cannot be determined which rule should be executed.

4. An multi-protocol gateway (MPGW) service is created to process a request message containing values for the MQMD.ReplyQ andMQMD.ReplyToQMgr that are not configured in the MPGW service. The back end service sends a SOAP message as response to the MPGW service that needs to be routed to the originating client using MQ Object Descriptor (MQOD) method. How can the solution implementer accomplish this requirement using the configured MPGW service?

A) Using XSLT, inject service virtual headers named "ReplyToQ" and "ReplyToQM" with
the value of an empty string inthe response rule as shown below:
<dp:set-response-header name="'ReplyToQ'" value="' '"/>
<dp:set-response-header name="'ReplyToQM'" value="' '"/>
B) Using Header Tab, inject service virtual headers named "ReplyToQ" and "ReplyToQM"
with the value of an empty string for the front end with a direction as "front"
C) Using XSLT, inject service virtual headers named "ReplyToQ" and "ReplyToQM" with
the value of an empty string in the request rule as shown below:
<dp:set-request-header name="'ReplyToQ'" value="' '"/>
<dp:set-request-header name="'ReplyToQM'" value="' '"/>
D) Using Header Tab, inject service virtual headers named "ReplyToQ" and "ReplyToQM"
with the value of an empty string for the back end with a direction as "back"

5. A solution implementer needs to set the Log Priority of log messageswithin a WS-MediationPolicy policy attachment. How can the solution implementer configure the value of Log Priority?

A) Conformance object
B) Log Priority of the SLM action object
C) Policy Parameters object
D) Policy Attachments object

Solutions: