H3C GB0-371-ENU

Today, H3C GB0-371-ENU certification exam enjoyed by many people and it can measure your ability. With the certificate of H3C certified engineers, you will have a better job and a better future.

Passing the H3C GB0-371-ENU exam has never been faster or easier, now with DumpCollection GB0-371-ENU questions and answers, you absolutely can pass your exam on the first try.

DumpCollection is a good website that provides you with high quality and great value IT certification exam materials. Our exam dumps are written by IT experts who devoting themselves to providing candidates with the best and latest questions and answers on the basis for the real exam. 99.9% of hit rate absolutely can help you pass GB0-371-ENU exam.

If you don't know how to start preparing for H3C GB0-371-ENU exam, DumpCollection will be your study guide. The excellent PDF version & Software version exam materials cover all the key points required in the exam. You just take 20-30 hours to learn it.

DumpCollection will provide our customers with one year free update. Once the exam materials updated, we will prompt update these exam questions and answers and automatically send the latest version to your mailbox. If you fail in the exam, you just need to send the scanning copy of your examination report card to us and we will give you FULL REFUND.

Before you choose DumpCollection, you can download our free demo which includes a part of questions and answers about H3C GB0-371-ENU exam. With the help of our H3C GB0-371-ENU exam dumps, you will pass your exam with ease. DumpCollection will be your best choice.

Simple operation: just two steps to complete your order. After you make your payment, we will immediately send the product to your mailbox. Download the attachment and you will get your product.

Online GB0-371-ENU Test Engine supports Windows / Mac / Android / iOS, etc., because it is the software based on WEB browser.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the networking shown in the figure, the interconnection lines between RT1, RT2, RT3, and RT4 are all 1000M links except the shared Ethernet part which is a 10M link. The OSPF protocol is run to enable routing to communicate with these 4 routers. Both run PIMSM protocol, RP is 1.1.1.1, receivers are connected to the downstream interfaces of RT1 and RT2, and IGMP is enabled on the corresponding interfaces. Then, when the receiver sends a group join request, which of the following routers are connected (*, G) entry exists?

A) RT4
B) RT2
C) RT1
D) RT3

2. In the switching network as shown in the figure, all three switches only have default VLAN1, the interconnection ports of the three switches are all Trunks, and all VLANs are allowed to pass, and all three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the SWC, and the GVRP registration mode of the Ethemet1/0/1 port is set to Fixed on the switch SWA, and the status information of each Tmnk port is checked on the three switches. The correct one is displayed below (Choose one or more)

A) [SWC]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B) [SWB]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
C) [SWB]display interface Ethernet 1/0/2 Ethernet1/0/2 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
D) [SWA]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

3. In the PIM-DM network as shown in the figure, part of the unicast routing table of routers RT1 and RT2 is as follows:
<RT1>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24xxxxP1-1 C1-110.1.1.1POI11
1.1.0.0/16xxxxP1-2 C1-210.1.1.1Port1
<RT2>display ip routing-table
Routing Tables: Public
Destination/MaskProtoPreCost NextHop Interface
1.1.1.0/24XXXX P2-1 C2-111.1.1.1Port2
1.1.1.1/32XXXX P2-2 C2-211.1.1.1Port2
Then, when routers RT1 and RT2 perform Assert, the winner should be

A) If P1-1<P2-2, C1-1<C2-2, RT2 wins
B) If P1-1=P2-2, C1-1>C2-2, then RT2 wins
C) If P1-1=P2-1, C1-1>C2-1, then RT1 wins
D) If P1-1=P2-1, C1-1=C2-1, then RT1 wins
E) If P1-1<P2-1, C1-1<C2-1, RT1 wins
F) If P1-1=P2-2, C1-1=C2-2, then RT2 wins

4. In the networking model shown in the figure, if Accoing is received on RADIUsClient, the following statement may be correct.

A) The message is sent by RADIUS Server
B) This message is a start-accounting response message
C) The message is a stop-accounting response message
D) The message is sent by Host

5. When the IGMPV2 host leaves a multicast group, it will send a LeaveGroup message, which is correct as follows:

A) The query router immediately deletes the multicast group entry of the related Group after receiving the Leave message
B) The query router immediately sends a specific group query message after receiving the Leave message
C) The destination address of the Leave message is the same as the GroupAddress address in the message
D) The destination address of the Leave message is 224.0.0.2

Solutions: